Mutchus

This circuit use IC TDA1004A to main operation .IC is very nice and durable if used properly and correctly, by the way supply the correct voltage , don't supply more voltage than 20 volts, because it can damage the IC. This circuit suitable for subwoofer speakers, but this amplifier  is mono.See schematic and troubleshooting below : If the circuit above not working , posible cause is on : Supply voltage. IC Damaged or installation inverted. Component damaged . Installation components inverted. Line break PCB. Input not connected or input connect to ground. Output speaker not connected.

This is a high quality power supply with a continuously variable stabilised output adjustable at any value between 0 and 30VDC. The circuit also incorporates an electronic output current limiter that effectively controls the output current from a few milliamperes (2 mA) to the maximum output of three amperes that the circuit can deliver. This feature makes this power supply indispensable in the experimenters laboratory as it is possible to limit the current to the typical maximum that a circuit under test may require, and power it up then, without any fear that it may be damaged if something goes wrong. There is also a visual indication that the current limiter is in operation so that you can see at a glance that your circuit is exceeding or not its preset limits.    Technical Specifications - Characteristics Input Voltage: ................ 24 VAC Input Current: ................ 3 A (max) Output Voltage: ............. 0-30 V adjustable Output Current: ............. 2 mA...

This circuit use the IC AN7166  . On circuit have an advantage is very loud sound , although only 30W this circuit is like a 100 W transistor power amplifier. Its so good circuit with IC AN7166 . This circuit require minimum voltage 12 V and Maximum voltage 24 volt , I recomended voltage for this circuit is 18 volt. And use the battery supply current 5 Ampere. Maximum power output of one speaker 30 W with impedance 4 Ohm. See this circuit schematic below : Click image to view large Capacitor thats connect legs IC 4 and 3 is 1 nF . And capacitor thats connect legs IC 9 and 3 is 1 nF. For the input capacitor at 1 uF ( L and R ) for output capacitor at 1000uF with voltage 50 V or higher.