Mutchus

Understanding the parameters of "diode recovery time" .For prospective technicians are still learning and inexperienced, they generally recognize only two kinds of parameters of a diode, namely: The maximum working voltage (bias voltage when he gets back - or when not deliver - or when "off") The maximum operating current (when he gets a forward bias voltage of - or as leads - or when "on") Fast  Recovery diodes A similar experience we had some twenty years ago when a new SMPS first introduced on the television. When there is a diode voltage B + is broken. And then we replace the diode from the outside (our point of diode being sold in stores, rather than the official service) diode turns hot and soon broken. We think that the replacement diode voltage or current is less bulky. Then after replacement with a larger, but the result remains the same damage. Finally we order the diode with the same part number, and when the part arrived and was installed wrong...

Light Emitting Diode The LESD is basically a device which changes input electrical energy into output optical radiation in the visible or infrared position of spectrum depending on the semiconductor material used. LEDs have replaced incandesced lamp in many applications because of low voltage long life and fast on off switching. He materials used in manufacturing the LEDs are 1.        Gallium Arsenide Phosphide (GaAsP): It provides either red light or yellow light. 2.        Gallium Phosphide (GaP): It provides red or green light. 3.        Gallium Arsenide (GaAs): It provides infrared radiation Principle: When a P-N junction forward biased, charge carrier recombination take place at a junction as electron cross from the n- side and combine with holes on the p- side. Free electrons are in the conduction band of energy level while holes are in the valence band. Therefore electronics are at place ...