Mutchus

TX-2B / RX / 2B  5 channel radio remote control. This article is about a simple 5 channel radio remote control circuit based on ICs TX-2B and RX-2B from Silan Semiconductors. TX-2B / RX-2B is a remote encoder decoder pair that can be used for remote control applications. TX-2B / RX-2B has five channels, wide operating voltage range (from 1.5V to 5V), low stand by current (around 10uA), low operating current (2mA), auto power off function and requires few external components. The TX-2B / RX-2B was originally designed for remote toy car applications, but they can be used for any kind of remote switching application. Circuit diagrams and description . Remote encoder / transmitter circuit. 5 channel redio remote control encoder / transmitter circuit The TX-2B forms the main part of the circuit. Push button switches S1 to S5 are used for activating (ON/OFF) the corresponding O/P channels in the receiver / decoder circuit. These push button switches are interfaced to the built-in latch...

The HA13151/HA13152 are high output and low distortion 4 ch BTL power IC designed for digital car audio. At 13.2 V to 4 W load, this power IC provides output power 14 W with 10% distortion. Circuit Diagram: 14 W 4-Channel Audio Amplifier Datasheet for HA13151: Download

Where would we be without our infrared remote controls? Stuck back in the dinosaur era, that's where. IR remote controls are now built into lots of appliances, ranging from TV sets and VCRs to audio equipment, robots and lights. This relatively simple design makes it easy for you to add infrared remote control to your latest project or to existing equipment. What's more, it can control up to 10 different functions, which should be more than enough for most applications (usually, you'll only need one or two channels). Each output uses an open-collector transistor and this can be used to switch a relay or even to directly switch other 12V equipment. The outputs can also be used to drive LEDs via current limiting resistors or to drive optocouplers (eg, to provide isolation from high-voltage circuitry). Heavy current items such as motors and light bulbs will have to be driven by relays. We've made the job easy for you by including diagrams that show all the various options ...