Mutchus

Power supply regulator schematic – LGCM4320 Mini Hi-Fi Circuit Diagram - SMPS Click on the schematic to magnify

The TDA7294 is a Hi-Fi amplifier and can give 100W RMS but with 10% distortion. Supplying 30 Volts you can have 50 Watts RMS with 1% distortion. Frequency range start at 16Hz and can reach 100KHz. Make sure you are using good heatsink. The chip supports mute function as well. 50W Hi-Fi amplifier Circuit Diagram A symmetrical 30V power supply is all its need to power the unit. 

2 x 18W Hi-Fi Stereo Power Amplifier based around two TDA2030 ICs. It has good input sensitivity, low distortion, good operating stability and full protection against overloads and output short-circuits. It can be used as a booster amplifier for existing small systems or to drive a second pair of speakers besides the ones already connected to the system. The board needs a symmetrical power supply of ±18Vdc/3A and can be connected to loads of 8 or 4 Ohm. Large heat sink is required for this circuit. Diagram shown below indicates only left channel. Make two circuits for for stereo version. Picture of the project: 18+18 Watt Hi-Fi Stereo Audio Amplifier Circuit Diagram Circuit Diagram: Diagram Shows Only One Channel Parts: R1 = 22K R2 = 680R R3 = 22K R4 = 1R-1w D1 = 1N4001 D2 = 1N4001 C1 = 1uf-25V C2 = 22uF-25V C3 = 100nF-63V C4 = 100nF-63V C5 = 100uF-25V C6 = 100uF-25V C7 = 220nF-63V IC = TDA2030 If it does not work: Check your work for possible dry joints, bridges across adjacent tracks...