Mutchus

This is a 10 way electronic latching switch using just two switches. Each output can be latched on and off independently. 10 Way Electronic Switch Circuit Diagram Notes The schematic is shown above, and two switches S1 and S2 are used to control the outputs. The main work is done by U2 a CMOS4017 decade counter divider IC. At switch on, C1 is quickly charged by R4 and a brief reset pulse is applied to to the reset pins of both U1 and U2. This results in U1, a 7 segment display display driver and decade counter showing "zero" on the 7 segment display and pin 3 (which is the output zero) of the 4017 becoming high. Each time S1 is pressed the clock input of U2 is incremented, by one count and the display and 4017 will cycle through all 10 outputs. A separate reset switch is not provided as the display reads the currently selected output. When the 4017 is on a particular output, for example zero, then the controlled circuit can be turned on or off using switch S2. To latch the ou...

SMPS is the toughest section in Power Electronics. Tremendous knowledge is required for choosing active and passive parts for use in SMPS circuits. Special parts are often required specifically for use in SMPS. Many components that can be used for low frequency applications in Power Electronics may fail if used in SMPS circuits. When I started learning Power electronics in 2008, I placed emphasis on SMPS. Regarding SMPS, nothing was available here. I had to collect and gain everything piecemeal- knowledge, literature, active and passive parts, testing equipment etc. The main drawback was the lack of knowledge in this field. In my country, SMPS is not taught in detail in any engineering university. So, teachers are not readily available. Additionally, relevant books were also not available. So, my father chalked out a deliberate and detailed plan for me to learn SMPS: Detailed Plan for learning SMPS at home Step 1   – Collecting knowledge by collecting required books from abroa...