Skip to main content

Canon EOS M Digital Camera Enters into the Mirrorless Territory


Canon has long been a leader in the world of DSLRs, but when it comes to smaller sized shooters, Canon had largely concentrated on commercially viable consumer and prosumer class digital cameras, not really treading on the mirrorless camera technology known as Micro Four Thirds which has been around for some years now. The mirrorless camera comes close to a DSLR in terms of image quality, and yet is far less bulkier in terms of size, not to mention allowing you to change a fair number of lenses (a market which is growing), making it a favorite secondary camera to many.


Canon EOS M Digital Camera 2012

Well, Canon has finally decided to dip their toes into this particular market, by offering the Canon EOS M digital camera which is said to deliver exceptional EOS Full HD video quality with continuous autofocus, not to mention having it accompanied by a notable and expansive range of lenses.

Inspired by EOS technology, the EOS M will be able to leverage on the company’s core technologies, while distilling them down in order to deliver outstanding video capture capabilities without sacrificing image quality when it comes to still shots. Whenever you want to capture still images, the EOS M camera’s 18-megapixel APS-C-sized CMOS image sensor is more than capable of delivering a shallow depth of field, in addition to incredible low-light image quality and a wide dynamic range which is more than capable of capturing rich gradation and detail.

This is the latest member of the EOS family, where both videographers and photographers alike regardless of their level of professionalism and interest, will be able to play nice with a couple of lenses that were specially designed for Canon’s new camera format – namely the EF-M 22mm f/2 STM kit lens and the optional EF-M 18-55mm f/3.5-5.6 IS STM lens. Not only that, you are also able to make full use of your Canon EF and EF-S lenses courtesy of the optional Mount Adapter EF-EOS M.

Comments

Popular posts from this blog

TDA2030 complete tone control

At this time I present a series of amplifiers that use IC TDA2030, but this series is equipped with a tone control. Tone controls include Bass, Treebel, and Volume. Power amplifier and tone control has been put together in a single PCB. As well as its power supply circuit was also used as one with the power amp, and tone control. Making it easier in the installation and will look neat. Schematics Layout PCB PCB design This amplifier is a mono amplifier type, can be modif for guitar amplifiers. If not coupled amplifier (mic preamp) then you must deactivated potensio treble and bass, why? because if not using a mic preamp and still maintain potensio treble and bass sound input (input) from the guitar will not or the maximum discharge is not tight on the speakers. So you must deactivated a way to decide which directly connected capacitor with the tone control circuit, and capacitor were connected directly to potensio volume and input jack.

PID instruction in Allen Bradley PLC Closed Loop Control

PID instruction in Allen Bradley PLC [Proportional/Integral/Derivative] Closed Loop Control For   Processor SLC 5/02SLC 5/03SLC 5/04SLC 5/05    MicroLogix 1200 and MicroLogix 1500 (A special PID file replaces the old integer file control block.) Description of PID in PLC   This output instruction is used to control physical properties such as temperature, pressure, liquid level, or flow rate of process loops. The PID instruction normally controls a closed loop using inputs from an analog input module and providing an output to an analog output module as a response to effectively hold a process variable at a desired set point. The PID equation controls the process by sending an output signal to the actuator. The greater the error between the setpoint and the process variable input, the greater the output signal, and vice versa. An additional value (feed forward or bias) can be added to the control output as an offset. The result of the PID calculation (control vari...

NE566 Function Generator Circuit Diagram

The NE566 Function Generator is a Voltage-Controlled Oscillator of exceptional linearity with buf fered square wave and triangle wave outputs. The frequency of oscillation is determined by an external resistor and capacitor and the voltage applied to the control terminal. The Oscillator CAN be programmed over a ten-to-one frequency range by proper selection of an external resistance and modulated over a ten-to-one range by the control voltage, with exceptional linearity.  FMAX = 1 MHz     WIDE 1000:1 Continuous Sweep Possible  NE566 Function Generator Circuit Diagram Pdf Datasheet  Sourced by : Circuitsstream